Tenma 72-3530 - Display; Display Symbols and Specifications

4
Symbol Specication
Data recall
Data storage
Data hold
LoZ AC low impedance
Negative value
VFC Measuring of voltage to frequency converter
Alarm for high voltage
Circuit on-off measurement
Automatic shutdown
Auto Automatic range
Peak Peak measuring
MIN/AVG/MAX Prompt for measuring minimum/average/maximum value
AC/DC AC/DC measurement
∆ Relative measuring
mV, V Voltage unit: millivolt and volt
µA, mA, A Current: Microamp, milliampere and ampere
Ω, kΩ, MΩ Resistance unit: Ohm, kilohm and megohm
nF, µF, mF Capacitance unit: nanofarad, microfarad and millifarad
Hz, kHz, MHz Frequency unit: Hz, kHz, and MHz
mS Period unit: millisecond
% Duty ratio or % (4-20mA) measurement unit
AC AC
nS Conductivity unit: nano-siemens
NCV Non-contact AC voltage sensing
°C / °F Celsius or Fahrenheit
Undervoltage of battery in the machine
Interface output
Measuring value for main display
Measuring value for auxiliary display
XXXX Auxiliary display: Storage no. and setting value
H XX: XX Auxiliary display: hour XX: XX timing value
Simulated pointer
DISPLAY
RCL
STO

7




�





0
•

