This guide is intended for quick consultation only and does not replace the user and maintenance manual.
Before using the machine, read the user and maintenance manual contained in the machine’s packaging thoroughly and strictly follow all the
instructions.
PREPARATION & OPERATION
T290 (Push Model)
Quick Guide
ATTACHING/REMOVING THE BRUSHES
$WWDFKLQJWKHEUXVKUHVWWKHEUXVKRQWKHÀRRULQIURQWRIWKHPDFKLQHDQGFHQWUHLWZLWKWKHJXDUG/RZHUWKHKHDG
DQGRSHUDWHWKHEUXVKGULYHOHYHUUHSHDWHGO\XQWLOWKHEUXVKDXWRPDWLFDOO\HQJDJHVRQWKHÀDQJHKXE,IWKHRSHUDWLRQ
is not successful, repeat by pressing on the lever again and repeating the centring.
Removing the brush: raise the machine head by pushing the head lift pedal down and then to the right and operate
the brush/drive lever repeatedly. After operating the lever a few times, the brush is released and falls to the ground.
1
5
23
64
3/'&
EN
HO
2
ON
CHEM
HO
+
HO
2