18
HEADPHONE OUTPUT
To monitor while recording* please connect headphones with a 3.5mm
mini jack connector to the headphone out of the TRACK E device. For a
playback of your already recorded files, you also need to open the Setup
App playback section in the device’s menu. You can adjust the headphone
level for each device in the app.
* Note: US version has the headphone output deactivated during
recording! The output signal of the headphone out is not a looped
signal. It is processed!
MICRO SD CARD
The included 16GB microSD card is located on the left side of the TRACK E.
Just pull out the cover and push the card in to remove it. This card can re-
cord up to 30 hours in 24-bit recording format and 23 hours in 32-bit Float
recording format. Formatting the microSD card is easily done in the Setup
App via Bluetooth. You’ll find it in the settings section of the menu.
Note: When using dierent microSD cards, make sure you use one that
is qualified. Recommended are SanDisk/Western Digital 8/16/32GB or
similar class 10 SDHC up to 32GB. We recommend to leave the microSD
card inside the TRACK E and use the device as a hard drive (see p. 20).
To Next Page
Loading...
Need help?
General