EasyManua.ls Logo

Tentacle TRACK E - TECHNICAL SPECIFICATIONS; Recording Specifications; Connectivity Specifications; Performance Metrics

Tentacle TRACK E
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
TECHNICAL SPECIFICATIONS
Recording
Number of Tracks: 1
Sampling Rate: 48 kHz
Recording Bit-Depth: WAV (BWF)
Recording File Formats: 32-bit float / 24-bit
Recording Time: 30hrs (24-bit) / 23hrs (32-bit Float) with
16GB card
Storage Media: microSDHC card up to 32GB
(recommended class 10)
Signal Processing: Low cut filter, limiter (24-bit only)
Connectivity
Microphone Input: 3.5mm jack (screw lock)
Mic Plug-In Power: 5 V (switchable)
Headphone Output*: 3.5mm jack (dual mono unbalanced)
USB Connection: USB-C (USB 2.0)
USB Modes: Charging, card reader, firmware update
Performance
Frequency Response: 20 Hz - 20 kHz
Gain Range: +6 to +46 dB
Dynamic Range: 110dB typ
THD+N: ≤ -85 dB (0,05%)
Control & Sync
Bluetooth®: 4.2 (Low Energy)
Remote Control: Tentacle Setup App (iOS/Android)
Synchronization: Via Bluetooth® (Tentacle Setup App) or
jam-sync via cable