EasyManuals Logo

Tentacle TRACK E User Manual

Tentacle TRACK E
27 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
RECHARGEABLE BATTERY
The TRACK E has a built-in, rechargeable and replaceable Lithium-Polymer
battery. Charging is possible via USB-C. The charging status will be shown
by the charging LED right next to the USB-C port. The internal battery can
be charged from any USB power source.
The charging time is max. 2 hours if the battery is completely empty. Fully
charged, TRACK Es can run for up to 10 hours. When the battery is at less
than 10%, Tentacle indicates this by flashing the level LED yellow several
times. The device continues to run in this state, until it switches itself o at
3% of battery status. If the battery is completely empty, the TRACK E can
no longer be switched on before it has been recharged.
The battery is easily replaceable, once the performance is decreasing
after 2-4 years depending on the use. A battery replacement kit can be
obtained from Tentacle Sync.
In this case please contact support@tentaclesync.com
Please note: The charging process of the battery is stopped as soon
as temperatures below 0° or above +40° are reached in order to
preserve the battery‘s lifetime. This will be indicated by a red charging
LED.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tentacle TRACK E and is the answer not in the manual?

Tentacle TRACK E Specifications

General IconGeneral
Connector3.5 mm TRS
ConnectivityBluetooth
Weight30 g
Sample Rate48 kHz
Timecode FormatsLTC
Battery TypeLithium Polymer
Charging Time2 hours
Power SupplyUSB-C