No.3 Hex Key
No.5 Hex Key
No.4 Hex Key
03
Push the bike back and forth and
press the brake to check if the front
wheel wobbles. If so, please repeat
step 2 until you feel enough resistance
when closing
the quick release lever.
04
Turn the front wheel by hand and
check if there are any signs of scraping.
Tools needed: No.5 Hex Key
Note: This step is very important.
Please follow the instructions care-
fully. (Keep the brakes’ protective
sheets in a safe place for future use. )
05.
INSTALL THE FRONT WHEEL
011 Assemble your TENWAYS e-bike
To Next Page
Loading...
