INSTALL THE FRONT WHEEL
05.
Tools needed: No.5 Hex Key
05
If yes, please follow the steps below to make
adjustments:
▪ Use the No.5 Hex Key to slightly loosen the
mounting screws of the brake clamps so that
they can move slightly.
▪ Press the front brake 3 to 5 times.
▪ Hold the front brake lever and tighten the
mounting screws of the brake clamps.
▪ Turn the front wheel by hand and check for the
friction sound.
▪ If the friction source can be heard, loosen the
mounting screws of the brake clamps.
▪ Manually adjust the position of the brake
clamps to center the disc, and tighten the
screws again.
No.3 Hex Key
No.5 Hex Key
No.4 Hex Key
012 Assemble your TENWAYS e-bike
To Next Page
Loading...
