EasyManua.ls Logo

Tenways AGO X - BATTERY AND BRAKE MAINTENANCE

Tenways AGO X
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operating and storage temperatures of the battery.
The working temperature of the lithium battery is 0°C to 30°C.
It is recommended that the lithium battery be stored in an environment
where the temperature is 0°C to 25°C with 65±20% RH.
The performance of
lithium batteries is affected by the ambient
temperature.
Don't worry if the performance of your battery
degrades in cold weather.
The battery performance will resume when the temperature rises.
If possible, the battery should not be charged above 95% or
discharged below 10%, as this may decrease battery life.
A reasonable charging and discharging scheme can mitigate accelerated
battery deterioration or damage.
If you are not using your e-bike for an extended time, keep the power
at 50% to 70%, check the battery condition every 2 months to avoid
damage caused by over-discharging, charge and discharge the battery
every 3 months.
The new brake blocks and discs feature relatively smooth
surfaces,
so the braking effect will improve after you ride 100 km
or brake on long
downhills 3 to 5 times, when such surfaces
become roughened.
Check screws between the brake lever and the handlebar, a
s
well as
screws between the brake clamps and frame or front fork:
1. Check if these screws maintain the same fastening performance
when your
e-bike reaches a 200 km riding distance.
2. Check the fastening performance at every 1,000 km after the initial
200 km.
3. It is recommended to check the fastening performance of
screws after
every 600 km if you often ride under complex road conditions.
The wear degree of brake blocks should be checked after
you’ve
ridden on normal roads for 1,000 km, or 600 km if the
road conditions
are complex. The blocks should be replaced promptly when they are
two-thirds or more worn.
If you feel the brakes obviously loose but the wear degree of
brake
blocks is still acceptable, and there is no sign of oil leakage
on the brakes,
contact a professional bike store and ask technicians to replenish the lubricant.
Contact a professional bike store and ask technicians to
diagnose
and fix
the cause of any abnormal noise during riding which
persists after you
have cleaned any oil from the brake blocks and discs.
03.
BEFORE YOUR FIRST RIDE
How to maintain the battery How to maintain the brakes
034 Bike usage

Related product manuals