It is recommended to go to a professional bike store for maintenance
2-3 times
a quarter, or after every 1,000 km of riding. The following items should be
checked / performed during such maintenance:
▪ Performance of the hydraulic brakes.
▪ The fastening performance of screws, especially those between the discs
and bottom brackets, in key parts.
▪ The wear degree of the front fork parts.
▪ The wear degree of the chain wheel, freewheel, and chain.
▪ The wear degree of the front hub bearings.
▪ The wear degree of the pedal pivots.
▪ Lubrication of internal pivots to ensure the smoothness of pivots in chain
wheel, freewheel, front fork parts, front hub bearings, bottom bracket,
pedals, and other parts.
▪ The wear degree of the tires.
▪ The fastening condition of the battery, controller, motor, odometer, and
other electronic control parts.
03.
BEFORE YOUR FIRST RIDE
Professional store maintenance
035 Bike usage
To Next Page
Loading...
