Terex Genie GTH-4016 R User Manual

May 2015Second Edition - First Printing
Part No. 57.0009.0607 GTH 4016 R - GTH 4018 R - GTH-5021 R 91
This machine can be equipped with several
attachments.
Use only Genie approved attachments specified in
this section.
Information about how to fit and replace attachments
on the machine can be found in section “Quick Attach
Instructions”.
Information for use of this attachment is described in
the specific attachments operator’s manual available
on official Genie site www.genielift.com/en/service-
support/manuals
Genie GTH 4016 R - GTH 4018 R
Approved Attachments List:
• Floating Forks
(part number 55.0750.0118)
• FEM3 Forks with Hydraulic SIDE-SHIFT +/-
100mm
(part number 55.0750.0119)
• UK Floating Forks L1200mm sect.100x65mm
(part number 55.0750.0120)
• Loading shovel 800 Lt
(part number 59.0201.9022)
• Concrete bucket 500 Lt manual discharge
(part number 59.0401.2028)
• Concrete bucket 500 Lt hydraulic discharge
(part number 59.0401.2029)
• Concrete bucket 800 Lt manual discharge
(part number 59.0401.2030)
• Concrete bucket 800 Lt hydraulic discharge
(part number 59.0401.2031)
• Concrete mixing bucket 500 Lt full hydraulic
(part number 59.0401.2016)
• Brick-holder basket
(part number 59.0401.2032)
• Fixed hook on plate
(part number 59.0700.9013)
• Mechanical jib 2m length/ 2000kg capacity
(part number 59.0802.3027)
• Mechanical jib 4m length/900kg capacity
(part number 59.0802.3028)
• Hydraulic jib, 4m length/900kg capacity
(part number 59.0802.3029)
• Hydraulic winch 4000 kg
(part number 59.0901.9015)
• Fixed man-platform: 2P/300-F
(part number 59.1111.6013)
• Rotating and extendable man-platform:
3P/700-REM 4400 +/- 90°
(part number 59.1111.6014)
Attachments

Terex Genie GTH-4016 R Specifications

General

Brand	Terex
Model	Genie GTH-4016 R
Category	Lifting Systems
Language	English