Section 3 • Scheduled Maintenance Procedures
Part No. 116694 RL4000 • TML-4000 3 - 7
June 2013
MAINTENANCE SCHEDULES CONTINUED
ITEM
DAILY 200 Hours
10000
Hours
Visual inspection •
Clean and inspect after every 200 hours of
normal operating time. If generator is housed
in a harsh environment, it is advisable to clean
and inpect the unit more frequently.
•
Replace the bearing
•
Marathon Generators Maintenance Schedule
*Refer to the manufacturer's manuals for detailed maintence intervals and instructions. If the
information in the manufacturer's manual differs from that in this manual the manufacturer's manual
should take precedence.
Marathon Manual
Genie part number 116188