Terex tc37 - Checking, Maintenance and Inspection Plans; Initial Inspection (Handing-Over Inspection)

67
Operating Manual Crawler Excavator TC37
Care and Maintenance 7
7.7 Checking, maintenance and inspection plans
7.7.1 Initial inspection (Handing-over
inspection)
Work to be carried out by trained dealer service
personnel.
Fig. 37 Initial inspection
0
4/4
h.
HR3.7-04-33
12
7
R
2
4/12
3158
Activities Chapter
1 Check whether Operating Manual for the machine is kept in the machine.
2 Check engine oil level. Î 7.8.1, 74
3 Check hydraulic oil level. Î 7.8.8, 84
4 Check fuel level. Î 7.8.4, 77
5 Check coolant level. Î 7.8.3, 75
6 Check the oil level in the crawler gear units. Î 7.8.12, 87
7 Check the crawler-chain tension. Î 7.8.14, 88
8 Check the battery fluid level and charge. Î 7.8.18, 90
9 Grease machine (all lubricating points). Î 7.7.3, 70
10 Test run, hydraulic function check and test work.
11 Visual inspection for tightness of all hoses, pipes, cylinders, etc.
12 Check function of electrical indicating and warning elements, and the lighting system.
13 Initial delivery/handing-over certificate and return to manufacturer.
Tab. 17 Work involved in initial inspection