Terratrip GeoTrip - Keypad Functions and Operation; FRZ Key Functionality; DIS SET Key for Distance Adjustment

Page 14 of 20
number keys. You can enter 3 digits, so for a speed of 30 (kph or mph), press 0, 3, 0
and press ENTER once more to set. At any point press the upper CLR to exit.
12.0 Key Functions:
The main functions of the keys are given below, but the 10 keys to the left of the
display also function as number keys.
12.1 FRZ:
Press FRZ to hold the displays.
 In distance mode, the total distance display will freeze and carry on counting
in the background, the interval display will freeze, clear and carry on counting
in the background*.
 In the Time screen the stopwatch will freeze, zero and continue counting in the
background.
 In TSD screen 4 the average speed display will freeze on the current value,
reset to zero and carry on counting in the background.
* If ‘FRZ clear INT’ (see menu 8.3) is turned on in the settings menu, otherwise
interval distance will freeze, and continue counting in the background.
Press FRZ again, and the displays will resume.
12.2 DIS SET:
Press DIS SET to enter / adjust the total distance display. Use the number keys to
enter the required distance, and press ENTER to set. If you do not press a key within 5
seconds the unit will return to the previous screen, and the total distance will not be
adjusted.
12.3 SCREEN:
202 GeoTrip® Classic – There is only one screen showing Total and Interval
distance.
202 GeoTrip® – SCREEN button cycles between DIST screen, and SPEED screen.
303 GeoTrip® – SCREEN button cycles between DIST screen, TIME screen and
TSD screen.
In TSD mode, the up and down buttons move through the 4 TSD screens which show:
 TSD 1 – Stopwatch and Interval Distance.
 TSD 2 – Time of Day and Interval Distance.
 TSD 3 – Total Distance and Current Speed.
 TSD 4 – Average speed and interval distance.