Page 18 of 20
Use Up and Down to select the language you require, and press ENTER.
14.2 Factory Reset:
Press and hold upper CLR whilst turning the unit on. Wait until you hear a long bleep,
and the unit will return to factory settings.
14.3 Road Survey / high precision mode:
Press and hold DIS SET and ENTER for 2 seconds, and the decimal place will change
on the display. With 3 numbers after the decimal place, the unit is in Road Survey /
high precision mode. This mode is for commercial road surveying and is of no
practical use in rallies.
15.0 Electrical Connections & probe mounting:
15.1 Fig 1. Probe connections T005 & T005A:
To Next Page
Loading...
