Terratrip GeoTrip® User Manual
Page 3 of 20
Features
Feature 303 GeoTrip
GPS GPS
Probe inputs 2
5 Digit Calibration
Total Distance
Interval Distance
Speed
Average Speed
Max Speed
Time of Day
Stop Watch
Performance Timers x 3. With data logging.
Miles or km
Dis Fly speed adjust
Auto easy Calibration
Calibrate probe by GPS
1 or 2 CAL 2
Languages, EN, FR, DE, IT, ES, PT
Remote display
AVS. Regularity target speed indicator on remote
display
RZU Foot / Hand F + H
1.0 Probe Selection:
1.1 GPS receiver:
The Terratrip GeoTrip® has a removable cover on the rear case, this holds the GPS.
GPS can be fitted to the GeoTrip® after purchase.
1.2 Wheel Probe, Part Number T005:
Compatible with all cars. 1.5mm Gap sensor fits to either your wheel assembly or a
prop shaft on a 4x4 vehicle.
1.3 Wheel Probe, Part Number T005A:
Compatible with all cars. 3.5mm Gap sensor fits to either your wheel assembly or a
prop shaft on a 4x4 vehicle.
1.4 Speedo Cable Probe, Probe No. T006:
Fits most mechanical speedo cables.
To Next Page
Loading...
