6 Using the product
23
End mode: Measurement program finished (stop criterion
reached – memory full or number of readings) depending
on programming
① Last reading ② Highest reading
③ Lowest reading ④ Upper alarm value
⑤ Lower alarm value ⑥ Battery capacity in days
Last reading (see Fig. ① End mode)
6.4. Mounting the wall bracket
The scope of delivery does not include mounting
materials (e.g. screws, wall plugs).
✓ The data logger has been removed from the wall
bracket.
1. Position the wall bracket at the desired place.
2. Use a pen or something similar to mark the location for
the fastening screws.
3. Prepare the fastening location in accordance with the
fastening material (e.g. drill hole, insert wall plugs).
Shop for Data Logging products online at: www.DataLoggerSto re.com 1.888.610.7664
To Next Page
Loading...
