TESTO 425 - Display of the Readings; Adjusting the View

8 Controls via testo Smart App
28
2
Enter the value for the cross-sectional area and save.

The changes are transferred to the measuring instrument and
synchronization with the app is confirmed on the measuring instrument
via “SYNC DONE”.
8.5
Display of the readings
The available readings can be displayed in different views.
• Live view:
The readings transmitted by the measuring probes can be displayed in a live
view. Readings from all connected measuring probes are displayed.
• Graphic view:
Up to four different readings can be displayed in graph format. Readings to
be displayed can be selected by tapping on a reading above the diagram.
• Table view:
In the table view, all readings are displayed in sequence according to date
and time. Different readings from the individual measuring probes can be
displayed by pressing ◄ ►.
8.6
Adjusting the view
1
Click on .
2
Select Edit view.

An overview of all measurement channels and their measurement
parameters is displayed.
3
Deselect the “check mark” to hide a measuring instrument’s
measurement channel.
4
Click ▼ to select the unit of a measurement channel.
5
Click OK to confirm the settings.
1.888.610.7664 sales@GlobalTestSupply.com
www.Testo-Direc t.com