6 Using the product
55
between the transmitter and receiver, other transmitters of the
same frequency and strong electromagnetic fields).
> If necessary: Rectify the possible causes of the fault in radio
transmission.
Task Actions/description
Open Radio input screen.
> | | Configuration | Radio.
Activate/deactivate radio
and establish connection
to a radio humidity probe.
1. Active.
- A search is carried out for radio
probes and available radio probes
are displayed.
2. Highlight the radio probe to be used
by touching it ( ).
> To deactivate, touch the button
again.
Apply entries.
> .
To Next Page
Loading...
