12TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com
5. Charge Controller
HERA WIND PRO USER MANUAL
5.1 TECHNICAL DETAILS
The Wind Turbine Charge Controller from TESUP is an intelligent controller which controls the
wind turbine. It safely and efciently charges and control your battery with the wind generator
combination.
With its discreet appearance and simple operation with integrated protection functions, this
device has high efciency and no-load losses. The version of the controller will signicantly
increase the life and sustainability of all the component of the system.
The special features of TESUP Charge Controller and product information are listed below:
• Use of solid-state components.
• Manual brake function.
• Increasing the life of the controller. Microprocessor controlled charge with integrated
voltage and current limiting.
• Dump-load is included. Modern Load dissipation system in three steps to avoid immediate
blockage of turbine.
• Resistors might be used for heating.
To Next Page
Loading...
