6TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com
3. Technical
Description
HERA WIND PRO USER MANUAL
3.1 INTENDED USE
• The wind turbine system may only be used as a “small wind turbine system” (SWTS) to
generate power in accordance with EN 61400-2.
• The wind turbine system may only be operated in accordance with the ratings and in the
approved wind class (refer to the technical data).
• Observance of the original instructions and compliance with the maintenance and repair
instructions are essential preconditions of use for the intended purpose.
3.2 REASONABLY FORSEEABLE MISUSE
• All forms of use which deviate from or exceed the limits of use described above are contrary
to the intended purpose. The manufacturer is not liable for any damage resulting from such
use.
• No liability will be accepted by the manufacturer if the equipment has been altered as
well as in the event of improper assembly, installation, start-up, operation, maintenance, or
repair.
• Only original parts supplied by the manufacturer are approved as spare parts or accessories.
Any spare parts or accessories not supplied by the manufacturer have not been tested
for operation and could be detrimental to reliability. No liability will be accepted by the
manufacturer for any damages which result from the use of non-approved spare parts or
accessories.
• Reasonably foreseeable misuse includes:
• Operation outside the manufacturer’s specication.
• All modications or changes to the wind turbine system without the manufacturer’s
written approval.
• Use of parts other than HERA Wind Pro original parts.
• Operation in non-approved SWTS classes.
• Operation in strong winds or hurricanes.
To Next Page
Loading...
