17TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com
6. Safety Information
HERA WIND PRO USER MANUAL
6.1 MODIFICATIONS BY THE USER
• The wind turbine system is in conformity with the European Machinery Directive 2006/42/EC
provided only original HERA Wind Pro components are used and subject to proper erection.
The use of components from other manufacturers as well as modications or changes to
the wind turbine system by the user are prohibited and could render the declaration of
conformity invalid.
6.2 RESIDUAL RISKS
• Any residual risks which arise because of operation or maintenance are described in the
relevant sections of these instructions.
6.3 PERSONNEL REQUIREMENTS
• All work on the wind turbine system must be carried out by authorized persons. Such
persons must be familiar with the safety devices and regulations prior to carrying out the
work. Authorized persons are dened as follows:
Operating mode Necessary qualications
Erection Suitably trained persons
Normal operation Trained personnel
Cleaning Trained personnel
Maintenance Suitably trained persons
Repair Manufacturer
WARNING: Never open the turbine body and expose the generator
unless you are instructed to do so by a TESUP engineer. Opening
the turbine body and modications to the turbine system will void
your warranty.
To Next Page
Loading...
