EasyManua.ls Logo

Tesup HERAWindPro - Pre-Use Preperation; Shipping Conditions; Pre-Reqs at the Place of Use; Permissible Wind Class and Minimum Clearances

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING: Danger to life due to operation in non-approved
wind classes! The wind turbine system may only be operated
up to Class III wind sites.
19TESUP Electronics Ltd. All rights reserved. ©2023 | www.tesup.com
7. Pre-use
Preperation
HERA WIND PRO USER MANUAL
7.1 SHIPPING CONDITIONS
The wind turbine system is shipped disassembled.
Refer to the contract documentation for the scope of supply.
7.2 PRE-REQS AT THE PLACE OF USE
Certain prerequisites are to be followed at the place of use.
Specications related to footprint, minimum clearances and installation conditions are
provided, which needs to be taken care of.
7.3 PERMISSIBLE WIND CLASS AND MINIMUM CLEARANCES
For information on local wind classes, please contact the responsible authorities or your
nearest meteorological ofce.
The place of use must be free of obstacles; alternatively, the wind turbine must be erected
with a sufcient height. As this is specically for home use, the location on top of the house
or terrace should be good for proper functioning of the turbine.
IMPORTANT: When choosing the place of use, make sure
adequate room is available to tilt the tower and blades

Related product manuals