Important Tips before Use
Remove power cords and small objects from the floor that may become
entangled with the X500Pro.
The X500Pro may climb on top of objects less than 0.63 in/16 mm in height.
Remove these objects if possible.
Do NOT stand around narrow places, such as thresholds and aisles, to reduce
the uncovered rate.
The X500Pro will clear all memories and re-plan all work routes if it is manually
moved or it is controlled by the remote control during cleaning. To ensure it
works efficiently, please do NOT arbitrarily move X500Pro manually or operate it
by remote control during cleaning.
Anti-drop sensors prevent the X500Pro from tumbling down stairs and steep
drops. They may work less effectively if they are dirty or used on reflective/very
dark-colored floors. It is recommended that physical barriers are used to block
off areas where the X500Pro may fall.
Please make sure all furniture is properly organized so that the X500Pro is able
to clean well without becoming stuck.
1
1
2
2
3
3
4
4
5
5
6
6
3. Using Your X500Pro
5
To Next Page
Loading...
