Teuco S01 - Date and Time

35
EN
15sec.
- From the INFO MENU select the DATE
AND TIME icon, using the arrows to move
the cursor.
- Press OK to access the DATE AND
TIME MENU.
- From the DATE AND TIME MENU, use
the UP-DOWN arrows to set the day.
- Press RIGHT to conrm and pass to the
month setting.
- Use the UP-DOWN arrows to set the
month.
- Press RIGHT to conrm and pass to the
year setting.
- Use the UP-DOWN arrows to set the
year.
- Press RIGHT to conrm and pass to the
hour setting.
- Use the UP-DOWN arrows to set the
hour.
- Press RIGHT to conrm and pass to the
minutes setting.
- Use the UP-DOWN arrows to set the
minutes.
- Press OK to conrm.
- To cancel the operation, press EXIT.
- If no buttons are pressed for 15 seconds
the panel will return to READY MENU
mode.
The DATE AND TIME function serves to set the date and time viewed on the control panel display.
THE CORRECT SETTING OF DATE AND TIME VALUES GUARANTEES THE CORRECT OPERATION OF THE
FILTERING AND ENERGY-SAVING FUNCTIONS.
INSTRUCTIONS FOR USE
SECONDARY FUNCTIONS
DATE AND TIME
INFO