-15-
DISPLAY
Press the DISPLAY button during play to show
the disc’s relevant information on TV screen.
ZOOM
Press the ZOOM button during play or pause to
zoom up the current picture. There are 3 levels of
zoom available (x1, x2, x3). Press continuously
to resume normal playing. Some discs have no
such function or have only x1 or x2.
MODE
Press the MODE button during normal playback to
display the MODE and REPEAT menus. Use the
5or6buttons to select your desired item and
press the OK button to set the options in the
submenu. For DVD discs there are two options in
mode submenu (OFF, Shuffle) and three options
in REPEAT submenu (CHAPTER, TITLE and OFF).
For CD discs there are two options in mode
submenu (OFF, and Shuffle) and three options in
REPEAT submenu (SINGLE, ALL and OFF).
After choosing your desired option, please press
MODE again to turn the MODE menu off before
proceeding
Note. Some MPEG4 discs have no such function.
A-B REPEAT
Press A-B button during playback at the point
where repeat play is to commence (a) then press
again at the point where repeat play is to be
concluded (B). Repeat playback between point
(A) and point (B) starts.
Press A-B button once more where TV screen
shows “Rep off”.
Note: Some DVD discs have no such function.
REPEAT
Press the REPEAT button during the play to choose
from different REPEAT modes.
RETURN
Stop playing the current track or song then press
this button to return to the main menu from the
current menu when playing WMA, MP3, JPEG,
MPEG4 discs.
MARK
Press the “MARK” button on remote control during
the disc is played and the menu of mark setting
with three bookmarks will appear on the screen.
Use the direction buttons (5or6) on the remote
control to select mark numbers (Bookmarks 1, 2 &
3), and press the “OK” button to enter the playing
times where you would like to view again
afterwards. A maximum of three marks can be
stored.
Press “CLR” button to clear a particular mark.
Press “MARK” button to clear the display.
To play from a marked point, use the direction
buttons (5 or6) on the remote control to select
your desired mark, and press “OK” button to start
OPERATION
to playback from that point.
Marked positions can be recalled anytime by
pressing “MARK” button on the remote control.
Note:
1. All the marks are cleared when the power is
off or the disc is removed.
2. Some discs including WMA, MP3, JPEG, MPEG4,
DVD-AUDIO discs have no such function.
CLR
Setting program or searching need to input
number. Press CLR button to clear the number
when the input number is wrong.
ANGLE/AUDIO
Press ANGLE continuously during playback DVD
disc to toggle the disc between available angles
recorded on the disc if the disc has multi-angle
function.
Press AUDIO button during playback to toggle
between available audio languages recorded on
the disc if the disc has this multi-language function.
Note: Press AUDIO button could toggle available
audio language soundtracks.
PROGRAM
Press STOP button first then press PROGRAM
button, the program playback screen appears on
the TV set. 25 tracks or chapters can be
programmed. Use the NUMBER buttons to input
your preferred track (CD) or chapter (DVD) when
the blue cursor flashes on the position 1. Note:
Programming DVD must input title number ahead
of “:” and chapter number after it. It is invalid to
input the number larger than available. Then press
direction button (UP, DOWN, LEFT, RIGHT) down
to remove blue cursor to position 2 and the same
procedure to program your preferred track or
chapter. Use CLR button and enter new number
to amend false or unsatisfied program through
direction button. After you have selected all your
preferred title/chapter(s) or track(s), Remove the
cursor to “Play Program” and press “OK” button
or just press PLAY button to start program play. If
the cursor is removed to CLEAR ALL then press
OK button to clear all your entered numbers so as
to reenter. After desired numbers have been
entered, move the cursor to Play Program and
press OK to start the program playback.
You can quit program setting by pressing
‘PRGRAM’ button again and PLAY again to start
normal playback.
Note:
1. Some discs have no program function.
2. No Search function during programming playing
SEARCH
When you play a DVD disc, press the “SEARCH”
button and “Time” and “Title / Chapter” will appear
on the screen. Use the number buttons to set the
time or chapter or title. Press the “OK” button to
start playing from the selected point and press
DVD5000_IB.p65 05-10-22, 23:1715
To Next Page