-16-
OPERATION
“CLR” to cancel any wrong settings.
Note: Some discs have no search function.
TITLE (DVD only)
For DVD discs, press the TITLE button on the
remote control during playback, a list of titles on
the disc (depends on discs) will be displayed on
the TV. Use the direction button or the number
button to select your preferred title then press the
“OK” button to play.
MENU
Press the MENU button on the remote control
during playback of the DVD; a list of titles on the
disc (depends on discs) will be displayed on TV
set.
Use the direction or number buttons to select your
preferred items then press OK button to confirm
to display on TV set as you selected.
SUBTITLE
Press the SUBTITLE button on remote control
during playback. “Subtitle: [1]” will be displayed
on TV set that means a kind of language. Press
once more, “Subtitle: [2]” appeared on TV set
means another kind of language and accordingly
subtitles appear that represents how many kinds
of language being selected. “Subtitle: [OFF]”
appears that toggle subtitle.
Note: This function is valid only for DVD discs
with subtitles.
VIDEO OUT
This button provides easy access to this unit’s
video output without need to enter SETUP menu.
This button is effective during the STOP status.
Press continuously, it changes to following outputs
signal in turn: S-VIDEO, YUV, RGB, Y Pb Pr
Note:
1. The first time you press this button, the OSD
shows current video out format; If you want
to change the VIDEO output, you need to press
this button again before the OSD disappears.
2. The TV set without YUV input jacks will appear
Black-screen when you shift the unit’s VIDEO
OUT to YUV, that is a normal phenomena.
3. The TV set with YUV input jacks but no
Progressive Scan function can not play
normally if you shift the unit’s VIDEO-OUT to Y
Pb Pr, and blue screen will occur.
JPEG Photo CD/WMA/MP3/MPEG4 playing
Depends on folder/files structure written on the
CD-ROM, playback may start automatically after
inserting the CD-ROM with JPEG, WMA, MP3, or
MPEG4 and enter playing control menu as below.
Note: Some characters of the folder/file names
may not be displayed correctly.
These control modes are available: Folder Normal,
Folder Repeat, Disc Scan, Disc normal, Disc
repeat, Shuffle, Program Begin, Program End,
Single Track, Repeat single.
Remark:
1. Press the LEFT/RIGHT button to switch
between different control windows and during
MP3/WMA playing, you will need to STOP
playing the song first then switch between
the different windows.
2. Program Begin & Program End are for
Programming playing control only. When you
choose Program begin, please use the Left/
Right buttons to move the cursor to the desired
folder/file list window and press the OK button
to choose the desired files, then move the
cursor to the Program Begin and switch it to
Program End, then press the PLAY button to
play.
Playing control
Use the PLAY, STOP and PAUSE buttons for
control purposes. You may also select the next /
previous picture or songs using the SKIP+ and
SKIP- buttons. When one song is playing, you
can choose anther song by press the number
button and wait for 1 second or press the OK
button to go straight there.
Angle (JPEG file only)
You can rotate the picture to get different viewing
angles by pressing the ANGLE button. The
following angles can be displayed in turn: original
90, 180 or 270 Degrees.
Zoom (JPEG file only)
You get zoom in on pictures by pressing ZOOM
button. The following zoom levels are available:
Q4/3, Q3/2, Q2, Q1/4, Q1/2 and QOFF. Press PLAY
button to return normal.
Remark:
1. Some discs have no such function
2. Pictures larger than 1MB may not be displayed
correctly.
Title (JPEG file only)
Press TITLE button during play, up to 9 small
pictures within current folder will be displayed in
thumbnail mode, You can use the 345 6buttons to
choose your favorite picture. At the same time,
you can press the SKIP-/+ button to go to previous/
next page.
Note:
1. The reading time of JPEG picture CD formatted
discs may vary due to the level of content.
Please allow more time for highly formatted
discs.