TEXA RC3 - Product Information and Warranty; Warnings, Liability, and Copyright

Warnings
Use of the RC3 device is permitted upon acceptance of the following
conditions:
1. Liability
The customer is liable for the use of TEXA tools and software programs
purchased from the retailer.
The customer agrees to indemnify TEXA S.p.A. and the retailer from any
responsibility or damage resulting from improper use of TEXA S.p.A
products and software or use of the same without complying with the
instructions described in the programs and in the user manuals.
The customer must use all the data and information provided directly by
TEXA S.p.A. or by the retailer or through programs and user manuals,
knowing that these may be incomplete and that they must always be used
as an integration to her/his own professional knowledge. The customer is
also aware of the importance of product update in order to ensure
immediate adaptation to the requirements of a continuously evolving
market.
2. Copyright
For information regarding software use refer to the user licence that
appears on your screen upon installation of the software itself, or go to
www.texa.com and click on "Legal Info".
3. Warranty
HARDWARE: The retailer guarantees its product against manufacturing
faults and defects, verified and recognised by the TEXA S.p.A's assistance
network, for a 24 month period from the date of delivery or date of activation
of the software. This warranty consists in the obligation of the retailer and/
or of the service centre, to reset the functions of the products by replacing
or repairing the faulty components for free.
This warranty does not cover any faults or malfunctions due to a)
inadequate calibrations, insufficient/improper maintenance, wrong wiring
installations, transformation, changes, tampering, improper mounting or
dismounting, bad storage, non-compliant use, accidents caused by third
parties ; b) the use of software or interfaces, parts or consumable materials
that were not provided by the TEXA network assistance or TEXA S.p.A.
official sales; c) use of the products in an environment that do not respect
the parameters specified for the product; d) wrong preparation or
maintenance of the operating environment where the products are used.
15
en