How to use the RC3 rev counter correctly
In order to use the RC3 device correctly it is essential you follow the
instructions listed below:
-
The device must be placed in a dry environment away from heat sources.
-
Avoid bumping or hitting the RC3 device.
-
Do not wet the RC3 device with water or other liquids.
-
Do not put any objects on the cables and do not bend them at right angle.
-
Always power the RC3 using the battery system within the vehicle being
tested. External batteries cannot be used.
-
When using terminal ends and connecting cables to the vehicle, pay special
attention to the quality of the connection to avoid false contacts and/or
accidental cable connections with metallic parts of the vehicle. If provided,
use the rubber caps to protect the terminal ends not used. Strictly follow all
the instructions provided by the program.
19
en
To Next Page
Loading...