4.4 Operator Safety
The airbags inflate with great force and a device placed in
their expansion area may be projected towards the
occupants of the vehicle causing serious harm and
injuries.
Safety Measures:
•
Do not place the device in the expansion areas of any airbag.
The device was manufactured to be electrically safe and
insulated.
It is however necessary to reduce the risk of electric shock.
Safety Measures:
•
Make sure the electric power supply devices (auxiliary batteries) are disconnected and
that they remain so during the entire installation before proceeding with the installation
itself.
•
Do not touch the device, the accessories and the wiring with wet hands.
•
If liquid should penetrate inside the device, immediately disconnect the power supply
wiring and contact technical assistance.
The device's antenna was manufactured to be electrically
safe and mechanically resistant.
However, if the antenna is damaged in some way, contact
with skin could cause minor burns.
Safety Measures:
•
Do not use the accessory device if the antenna is damaged.
•
Do not touch the antenna with bare hands.
•
Immediately contact technical assistance.
66
To Next Page
Loading...
