•
speed limiter;
•
seat belt pretensioners.
•
Do not change the current flow of an OEM circuit by cutting it off, increasing it or
mechanically changing its cables if not permitted by the vehicle manufacturer.
The device must be installed so that it works correctly and
safely.
Safety Measures:
•
Avoid contact between the device and vibrating parts of the vehicle.
•
Do not spread out the wiring with the cables stretched.
•
Do not spread out the wiring in walkable areas or in areas that are subject to friction
without the necessary protections.
•
For the installation you must use only the wiring and the components provided with the
device.
•
Place the device at a minimum distance of 20 cm from the positions of the vehicle's
passengers.
At the end of the installation, you must restore the initial
conditions of the vehicle.
Safety Measures:
•
Restore each OEM electrical connection.
•
Restore each OEM device (ex.: compartment covers).
•
Replace the fastening elements that are damaged.
•
Restore any OEM anti-corrosion systems.
en
69
To Next Page
Loading...
