Texas Instruments CDCE6214-Q1EVM - Connect SDA, SCL, and GND to USB2 ANY

How to Use External Microcontroller www.ti.com
14
SNAU244–July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
Frequently Asked Questions - FAQ
3.2.2 Connect SDA, SCL, and GND to USB2ANY
Refer to Figure 3-3 and connect the SDA, SCL and GND to pin 1, pin 2, and pin 5 of USB2ANY (J4 in
Figure 3-3) separately. The rectangle on the top indicates the slot of USB2ANY box.
Figure 3-3. USB2ANY Pin Connection