Texas Instruments TI-83-Plus User Guide

TI-83 Plus GeoMaster™ Application Page 45
8. Press
s
to exit the
Eqns/Coords
tool.
9. Move the cursor to the point that was created with the
Point
on Object
tool, and then press
¯
.
10. Press
¯
again, and then use the arrow keys to move the
object to a different location on the circle.
11. Press
¯
to place the point in the new location. The
coordinate pair has been updated with the new coordinates
of the point.

Texas Instruments TI-83-Plus Specifications

General

Brand	Texas Instruments
Model	TI-83-Plus
Category	Calculator
Language	English