Texas Instruments TI-Nspire CAS Getting Started

100 Connecting Handhelds and Transferring Files
Connecting Two TI-Nspire™ Handhelds with the Mini-USB Cable
You can connect two handhelds as long as both handhelds are using the same
keypad. You cannot connect a handheld using the TI-Nspire™ TI-84 Plus
keypad to a handheld using the native TI-Nspire™ keypad.
The TI-Nspire™ handheld USB
port is located in the centre on
the top of the TI-Nspire™
handheld.
The USB port is located on the
top of the TI-Nspire™ CX
handheld on the right side when
holding the handheld with the
screen facing you.
À
Port for connecting a wireless adapter.
Á
USB port on the CX handheld.
To connect the handhelds:
1. Firmly insert either end of the mini-USB cable into the USB port.
2. Insert the other end of the cable into the receiving handhelds’s USB port.
Connecting the TI-Nspire™ Handheld to a Computer
1. Firmly insert the mini-USB end of the cable into the port at the top of your
handheld.

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm