Texas Instruments TI-Nspire CAS Getting Started

The Handheld Setup dialogue box opens.
2. Presseuntil the desired category is highlighted.
3. Press¢to view the list of possible settings.
4. Press¤to highlight the desired setting.
5. Press xor· to select the new setting.
6. When you have changed all the settings to suit your needs, press euntil
OK is highlighted, and then pressxor·to apply your changes.
Note: Click Restore to return the handheld to the factory settings.
Note: When operating in TI-84 mode, you cannot modify the power standby or
hibernate options. TI-84 mode will follow the same power settings established
within the TI-Nspire™ native mode.
Customising Document Settings
Document settings control how the handheld displays and interprets
information in TI-Nspire™ documents and in Scratchpad. All numbers, including
elements of matrices and lists, are displayed according to the document
settings. You can change the default settings at anytime and you can also
specify settings for a particular document.
Document settings and their possible values are listed in the following table.
Configuring Handhelds 87

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm