select the option.
Preparing the Handheld for Use
TI-Nspire™ handhelds are shipped with four alkaline AAA batteries and a
standard Amale to mini Bmale USB cable. Handhelds can also be powered
using the TI-Nspire™ Rechargeable Battery or an approved wall charger, which
are sold separately.
Before using the handheld, either install the AAA batteries or install and charge
the TI-Nspire™ Rechargeable Battery (if purchased). You can also connect your
handheld to an external power source if you have the wall charger.
Note: For more information about installing batteries, see
Configuring
Handhelds
.
Turning On the TI-Nspire™ Handheld for the First Time
1. Ensure that batteries have been installed or charged, or that the handheld
is connected to a power source.
2. Presscto turn on the handheld.
A progress bar displays while the operating system loads, and then you
are prompted to choose preferences for language and font size.
To turn the handheld off, press / c. The settings and memory contents
are retained.
Note: For more information about installing and charging batteries, see
Configuring Handhelds
.
Using Automatic Power Down™
To prolong battery life, the Automatic Power Down™ (APD™) feature turns off
the handheld after three minutes of inactivity. When this happens, press c
to turn the handheld on and return to the last document or menu accessed. To
change the default setting, press c 5 3 to access the Handheld
Setup screen where you can change the Power Standby setting.
Note: For more information about setting up the handheld, see
Configuring
Handhelds
.
Choosing a Language
After the OS is loaded, select a preferred language.
Getting Started with the TI-Nspire™ Handheld 9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
