Texas Instruments TI-Nspire CAS Getting Started

Connecting Handhelds and Transferring Files
This chapter describes how to connect one TI-Nspire™ handheld to another,
how to connect handhelds to a computer and how to transfer files between
them.
The TI-Nspire™ handhelds have a USB port that enables connectivity with
another TI-Nspire™ handheld or with a computer.
Note: When using the TI-Nspire™ TI-84 Plus keypad, you can connect with
another TI-Nspire™ handheld using the TI-Nspire™ TI-84 Plus keypad or a TI-84
Plus using the USB port or the I/O port.
Connecting Handhelds
Using USB Cables
You can use USB cables to connect two TI-Nspire™ handhelds, to connect a
TI-Nspire™ handheld to a computer or to connect one TI-Nspire™ handheld
using TI-Nspire™ TI-84 Plus keypad to another.
TI-Nspire™ USB connection cable to
connect handheld to a computer.
TI-Nspire™ handheld mini-USB cable
to connect two TI-Nspire™ handhelds.
Connecting Handhelds and Transferring Files 99

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm