102 Connecting Handhelds and Transferring Files
• All variables associated with the document being transmitted are
transferred with the document.
• Transmissions will time out after 30 seconds.
Caution: Some older TI-Nspire™ handhelds cannot receive folders; only files. If
you receive an error in sending to an older TI-Nspire™ handheld, see
Common
error and notification messages
.
Sending a Document or Folder to Another Handheld
1. Ensure the two handhelds are connected.
2. Open the My Documents file browser and navigate to the file or folder you
want to transfer.
3. Press the £ and ¤ keys on the Touchpad to highlight the document or
folder you want to send.
4. Press ~ 1 6 to select Send from the Documents menu.
TI-Nspire™ handheld: Press ~ 1 6.
5. The file transfer begins. A progress bar shows the status of the transfer.
There is also a cancel button in the Sending... dialogue box to enable you
to cancel the transmission while it is in progress.
At the end of a successful transmission, the message
“<Folder / File name> transferred as <Folder / File name>.” is displayed. If
the file had to be renamed on the receiving handheld, the message will
show the new file name.
Receiving a Document or Folder
No action is required by the user of the receiving TI-Nspire™ handheld.
Handhelds are automatically powered on when the cable is attached.
At the end of a successful transmission, the message “<Folder / File name>
received.” is displayed. If the file had to be renamed, the message will show the
new file name.
Caution: Some older TI-Nspire™ handhelds cannot receive folders; only files. If
you receive an error in sending to an older TI-Nspire™ handheld, see
Common
error and notification messages
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
