Texas Instruments TI-Nspire CAS Getting Started

Changing Default Document Settings
Complete the following steps to define default document settings for TI-Nspire™
documents and Scratchpad.
1. Save and close any open documents.
2. From the Home screen, press 5 2 (Settings > Document Settings).
The Document Settings dialogue box opens.
Note: If a document is open, the Document Settings dialogue box also
contains an OK button. If you select OK, settings are only applied to the
open document.
3. Press e to move through the list of settings. Press £ to move backward
through the list.
A bold line around a box indicates it is active.
4. Press ¢ to open the drop-down list to view the values for each setting.
5. Press the £ and ¤ keys to highlight the desired option, then press
xor· to select the value.
6. Select Make Default.
The Apply and Save as Default dialogue box opens.
Configuring Handhelds 89

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm