Texas Instruments TI-Nspire CAS Getting Started

2. Press eto move through the list of settings. Press £ to move backward
through the list.
A bold line around a box indicates it is active.
3. When you reach the desired setting, press ¢to open the drop-down list to
view values for each setting.
4. Press the £ and¤ keys to highlight the desired option, then press
xor· to select the value.
5. Click OK or press xor·to apply the new settings only to the open
document.
The Home screen opens and the new settings are only applied to the open
document.
To apply the new settings to the open document and to documents created
in the future:
• Select Make Default and press xor·.
• Click OK to apply the settings to any open documents and save the
settings as defaults for new documents and for Scratchpad.
Restoring Document Settings
Complete the following steps to restore the original factory settings to open or
new documents and to the Scratchpad.
1. From the Home screen, press 5 2 (Settings > Document Settings).
The Document Settings dialogue box opens.
2. Use the Touchpad or press e to select Restore, then press ·.
The Restore Defaults dialogue box opens.
Configuring Handhelds 91

Texas Instruments TI-Nspire CAS Specifications

General

Type	Graphing
Cover	-
Form factor	Pocket
Control type	Buttons, Touch
Product color	Grey, Silver
Digits	- digits
Display tilting	No
Display resolution	320 x 240 pixels
Display number of lines	- lines
Compatible operating systems	Windows XP/2000\\r Mac OS X 10.4/10.5
Battery type	AAA
Power source	Battery
Number of batteries supported	4
USB port	Yes
USB 2.0 ports quantity	1
RAM capacity	16 MB
ROM capacity	20 MB

Weight and Dimensions

Depth	198.3 mm
Width	100 mm
Height	28.7 mm