3. Press ¤ as necessary to highlight LinRegMx.
4. If the Wizards On option is not checked, press e e to highlight Wizards On.
5. Press · to change the setting.
6. Press e e to highlight LinRegMx again.
LinRegMx function in a non-CAS handheld
LinRegMx function in a CAS handheld
7. Press ·.
A wizard opens, giving you a labeled box to type each argument.
8. Type {1,2,3,4,5} as X List.
9. Press e to move to the Y List field.
10. Type {5,8,11,14,17} as Y List.
Using the Scratchpad 25
To Next Page
Loading...
