Texas Instruments ti nspire cx Guide Book

76 Configuring Handhelds
3. Press e to move through the list of settings. Press £ to move backward through
the list.
A bold line around a box indicates it is active.
4. Press ¢ to open the drop-down list to view the values for each setting.
5. Press the £and¤ keys to highlight the desired option, then press xor· to
select the value.
6. Select Make Default.
The Apply and Save as Default dialog box opens.
7. Click OK to save the settings as default settings that will be applied to all
TI-Nspire™ documents and to Scratchpad.
Changing Document Settings in a TI-Nspire™ Document
Complete the following steps to change document settings for an open TI-Nspire™
document. You can apply the settings to the current document only or choose to make
the settings the default settings for the open document and all future documents.
1. From an open document, press c 5 2 (c > Settings > Document
Settings).
The Document Settings dialog box opens.

Texas Instruments ti nspire cx Specifications

General

Power	Rechargeable lithium-ion battery
Operating System	TI-Nspire OS
Programming Support	TI-Basic, Lua
Display	320 x 240 pixel color display (3.2 inch diagonal)
Connectivity	USB
Memory	100 MB storage memory
Processor	150 MHz ARM9
Dimensions	7.5 x 3.4 x 0.8 inches
Graphing Capabilities	3D graphing