5.2 Entering Debug Mode
This section provides the steps for using Debug mode.
1. Ensure the USB to I2C/SPI adapter is selected accordingly with the device being used. In this case select the
Tiva adapter. Sweep I2C address range to discover the port addresses.
Figure 5-4. USB to I2C/SPI Adapter Settings
www.ti.com
Tiva USB to I2C Bridge Support Integration
SLVUBM1C – JANUARY 2019 – REVISED JANUARY 2021
Submit Document Feedback
TPS65994 EVM User Guide 13
Copyright © 2021 Texas Instruments Incorporated
To Next Page
Loading...
