Need help?Do you have a question about the Texecom Impaq S and is the answer not in the manual?
Key parts of the Impaq S device.
Key parts of the Impaq SC device.
Key parts of the Impaq S Grade 3 device.
Instructions for mounting the device, including screw types and tamper considerations.
Guidance on positioning the magnet for the Impaq SC for optimal sensitivity.
Wiring Impaq S for independent alarm and tamper loops using normally closed inputs.
Wiring Impaq S with leaded resistors in an EOL configuration for alarm and tamper.
Wiring Impaq S using EOL DIP switch selected resistors for alarm and tamper.
Recommended sensitivity settings based on material and radius.
Details on current, humidity, temperature, weight, and dimensions.
Key parts of the Impaq S device.
Key parts of the Impaq SC device.
Key parts of the Impaq S Grade 3 device.
Instructions for mounting the device, including screw types and tamper considerations.
Guidance on positioning the magnet for the Impaq SC for optimal sensitivity.
Wiring Impaq S for independent alarm and tamper loops using normally closed inputs.
Wiring Impaq S with leaded resistors in an EOL configuration for alarm and tamper.
Wiring Impaq S using EOL DIP switch selected resistors for alarm and tamper.
Recommended sensitivity settings based on material and radius.
Details on current, humidity, temperature, weight, and dimensions.
General| Type | Shock Sensor |
|---|---|
| Operating Temperature | -10°C to +55°C |
| Mounting | Surface Mount |
| Tamper Protection | Yes |
| Material | Plastic |
| Color | White |
| Frequency | Not Applicable |
To Next Page
