Operating the Alarm System Premier Series User Guide
22 INS177
To Turn CHIME On and Off
The system can be set up so that activating (opening) certain zones will cause the
internal sounders to chime. This would normally be used on a front door, exit button etc.
!"
Zones will only cause the internal sounders to chime if they are selected for chime
(see page 34 for details on selecting which zones chime).
Once a zone has been selected for chime, the Chime facility can be manually turned on
and off as required.
!"
The system can also be programmed to automatically turn Chime on and off
under certain conditions i.e. certain times of the day, door left open etc.
If no zones have been programmed for chime, then turning Chime on and off will
have no effect.
To turn CHIME On proceed as follows:
Press
&
The Chime tone will sound.
To turn CHIME Off proceed as follows:
Press
&
The Fault tone will sound.
To Next Page
Loading...
