Programming the Alarm System Premier Series Master User Guide
48 INS177
User Config.
This menu defines which menu options are available to the user when their code is entered.
This menu will only be displayed if a Custom User type is selected AND ‘User Menu’
(User Option: U) is enabled (see page 47 for details).
Press
*
to scroll through the options and press
$
to select them or use keys
!
-
5
(‘Letter’ = option IS selected, ‘Star’ = option is NOT selected).
The following options are available:
C - Change Code
The selected user can change their own User code.
Z - Chime Zones
The selected user can access the ‘Edit Chime Zones’ option, allowing them to select
which zones chime when activated (see page 34 for details).
T - Change Timers
The selected user can access the ‘Override Timers’ (see page 40 for details) ‘Alter
Timers’ (see page 41 for details) ‘Alter Part Arms’ (see page 53 for details) ‘Alter Hol.
Dates’ (see page 55 for details) and ‘Edit Phone No.’ (see page 58 for details) menu
options.
S - System Tests
The selected user can access the ‘System Tests’ option, allowing them to walk test
zones, activate the external sounder etc. (see page 35 for details).
U - Setup Users
The selected user can access the ‘Setup Users’ option, allowing them to alter existing
users or assign new users (see page 43 for details). However, users cannot assign User
types to the system that have a higher access level than themselves. Also, if a user
assigns a Custom User type, functions that are not available to them cannot be assigned
to the Custom user.
E - Eng. Access
The selected user can access the ‘Enable Engineer’ option, allowing them to authorise
Engineer access or Remote UDL access to the system (see page 30 for details).
A - Add Eng. Code (Engineers only)
Only Available to Engineers.
N - NVM Locking (Engineers only)
Only Available to Engineers.
To Next Page
Loading...
