Texecom PREMIER 88 - Available Options

Premier Series Master User Guide Programming the Alarm System
INS177 45
Available Options
The table below shows the options that are available to each user.
!"
All users that have access to the ‘Arming Menu’ have the ability to ‘View Zone
Status’, ‘Set Chime Areas’, ‘View Act. Faults’ and ‘View Act. Counts’.
All users have access to the ‘User Menu’ have the ability to ‘View Event Log’,
‘Adjust Volumes’ and ‘Print Event Log’.
User Options 1
Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Custom
Arming Arming Arming Arming Arming Arming Arming - Arming Arming
Disarming Disarming Disarming Disarming Disarming Disarming - - Disarming Disarming
Omitting Omitting Omitting Omitting Omitting Omitting - - Omitting Omitting
Eng. Reset - - - - - - - - -
- - - - Local Arming - - - - -
- - - - Local Disarm - - - - -
- - - - - - - - - -
Disarm First Disarm First - Disarm First Disarm First Disarm First Disarm First Disarm First - Disarm First Disarm First
User Options 2
Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Custom
User Menu User Menu User Menu User Menu User Menu - User Menu - User Menu User Menu
Eng. Program - - - - - - - - -
- - - - - - - - - -
- - - - - - - - Vacation -
Door Strike Door Strike - - - - - Door Strike - -
Call Rem PC Call Rem PC Call Rem PC - - - - - - -
- - - - - Duress Code - - - -
Open/Close Open/Close Open/Close Open/Close Open/Close Open/Close Open/Close - Open/Close Open/Close
User Config
Engineer Master Manager Standard Local Duress Arm Only Door Strike Vacation Custom
Change Code Change Code Change Code Change Code Change Code - - - - -
Chime Zones Chime Zones Chime Zones Chime Zones Chime Zones - - - - -
Change Timer Change Timer Change Timer - - - - - - -
System Tests System Tests System Tests - - - - - - -
Setup Users User Setup - - - - - - - -
Eng. Access - - - - - - - - -
Add Eng Code - - - - - - - - -
NVM Locking - - - - - - - - -