Texi joylock 2/4 User Manual

Texi Joylock 2/4 61
EN
SETTING UP YOUR MACHINE
1. Wipe o excess oil in the
needle plate and plate areas.
2. FOOT CONTROL
Push foot control plug
into connector socket, and
connect the power line plug
into power supply outlet.
3. POWER/LIGHT SWITCH
Your machine will not operate
unless the power/light switch
is turned on. The same
switch controls both machine
power and sewing light.
When leaving the machine
unattended, or servicing the
machine, remove the power
line plug from supply outlet.
4. OPENING FRONT COVER
To open front cover, pull it to
the right and down towards
you.
5. OPENING WORKING TABLE
To open working table, pull
the release lever towards you
with your right hand, and lift
the front of presser foot up
with your left hand.

Texi joylock 2/4 Specifications

General

Brand	Texi
Model	joylock 2/4
Category	Sewing Machine
Language	English