Texi joylock 2/4 - Troubleshooting Common Problems

Texi Joylock 2/4 81
EN
POSSIBLE PROBLEMS AND ADVICES
PROBLEM PROBABLE CAUSE CORRECTION
Irregular
Stitches
Incorrect Thread Tension(s). Reset thread tension(s).
Incorrect size Needle. Choose correct size Needle for
Thread and Fabric.
Improper Threading. Re-thread machine.
Pulling fabric. Do not pull Fabric; guide it
gently.
Loose Presser Foot. Reset Presser Foot.
Breaking
Needle
Pulling fabric. Do not pull Fabric; guide it
gently.
Incorrect size Needle. Choose correct size Needle for
Thread and Fabric.
Incorrect setting of Needle. Reset Needle.
Loose Presser Foot. Reset Presser Foot.
Puckering Incorrect Thread Tension(s). Reset Thread Tension(s).
Bent or blunt Needle. Insert new Needle.
Dierential feed is set
Incorrectly.
Set it at less than 1.
Wavering Dierential feed is set
Incorrectly.
Set it at 1 or at more than 1.
For knitted fabrics.
Skipping
Stitches
Improper Threading. Reset thread machine.
Incorrect size Needle. Choose correct size Needle for
Thread and Fabric.
Bent or blunt Needle. Insert new Needle.
Incorrect setting of Needle. Reset Needle.
Breaking
Threads
Improper Threading. Re-thread machine.
Bent needle. Insert new Needle.
Thread Tension(s) too tight. Reset thread tension(s).
Incorrect setting of Needle. Reset needle.
Thread Spool tangled. Reset spool properly.