Texi Joylock 2/480
EN
CLEANING AND OILING
To keep the machine running smoothly, keep it clean and lubricated at all times.
FIRST DISCONNECT MACHINE FROM POWER SUPPLY BY REMOVING PLUG FROM
SOCKET-OUTLET.
1. Open the front cover and working table. Using the brush provided, remove dust
and lint that have accumulated.
2. Apply a few drops of oil to the points indicated by arrows. ALWAYS USE A GOOD
QUALITY SEWING MACHINE OIL.
3. Remove each top cover with screw driver and remove dust and lint of inside
with the brush.
To Next Page
Loading...
Need help?
General
