BHT-206A/B-SERIES-MM-1
5-00-00
Page 62 Rev. 14 30 APR 2013
Export Classification C, ECCN EAR99
Chapter 96 9. Perform operational check of all transmission chip
detectors.
10. Ensure no sealant voids are visible around deck mounted
supports, fittings, and isolation mount. Reapply sealant (C-308)
as required.
Chapter 63 MAIN DRIVESHAFT
1. Examine main driveshaft as follows:
a. Examine main driveshaft for visual damage and
couplings for grease leakage.
b. Check driveshaft for freedom and smoothness of axial
movement.
c. Examine main driveshaft attachment bolts for security.
TEMP-PLATE indicator dots are of a white or gray
color that turn black when exposed to an
overtemperature condition. Chemical contamination
can also cause the indicating dots to turn black.
d. Inspect TEMP-PLATES for evidence of overheating
indication, deterioration, debonding, or excessive discoloration
of the epoxy overcoating.
Chapter 96 ELECTRICAL
1. Examine all electrical components, wires, cables, and
connectors in the area of the forward deck and transmission for
chafing, general condition, and security.
5-22. 300-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 2 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER